你的位置:首页 > 技术支持 > 红外摄影

CANNON 300D 红外改机教程

2013/11/13 10:08:32      点击:

You will need these tools & supplies to follow the Rebel infrared conversion tutorial:

Our custom glass infrared filter to replace the hotmirror
- Soldering iron and desoldering wick or desoldering gun
- Black silicone adhesive /w syringe type dispenser
- Small philips type screwdriver
- Tweezers
- Canned air
- Lens cleaning solution & tissue
- Grounding strap /w current limit resistor

If you prefer not to risk damage to your camera, have us convert it to infrared for you. It would be best to perform the conversion in a well lit area that is as clean and dust free as possible. Wearing a grounding strap will minimize the chance of zapping your camera with static and most likely rendering it dead.

Remove the rubber eye cup.

Canon Rebel 300D Infrared DIY Tutorial Step 1

Canon Rebel 300D Infrared DIY Tutorial Step 1

Remove the self adhesive screw cover.

Canon Rebel 300D Infrared DIY Tutorial Step 2

Canon Rebel 300D Infrared DIY Tutorial Step 2

Remove marked screws.

Canon Rebel 300D Infrared DIY Tutorial Step 3

Canon Rebel 300D Infrared DIY Tutorial Step 3

Remove marked screws.

Canon Rebel 300D Infrared DIY Tutorial Step 4

Canon Rebel 300D Infrared DIY Tutorial Step 4

Remove marked screws.

Canon Rebel 300D Infrared DIY Tutorial Step 5

Canon Rebel 300D Infrared DIY Tutorial Step 5

Remove the I/O covers.

Canon Rebel 300D Infrared DIY Tutorial Step 6

Canon Rebel 300D Infrared DIY Tutorial Step 6

Lift up the rear LCD panel and disconnect the marked ribbon cable.

Canon Rebel 300D Infrared DIY Tutorial Step 7

Canon Rebel 300D Infrared DIY Tutorial Step 7

Remove marked screws.

Canon Rebel 300D Infrared DIY Tutorial Step 8

Canon Rebel 300D Infrared DIY Tutorial Step 8

Desolder marked solder joint.

Canon Rebel 300D Infrared DIY Tutorial Step 9

Canon Rebel 300D Infrared DIY Tutorial Step 9

Flip over the rear LCD assembly and disconnect marked cables.

Canon Rebel 300D Infrared DIY Tutorial Step 10

Canon Rebel 300D Infrared DIY Tutorial Step 10

Desolder marked solder joints.

Canon Rebel 300D Infrared DIY Tutorial Step 11

Canon Rebel 300D Infrared DIY Tutorial Step 11

Lift out the metal noise sheild.

Canon Rebel 300D Infrared DIY Tutorial Step 12

Canon Rebel 300D Infrared DIY Tutorial Step 12

Disconnect marked cables.

Canon Rebel 300D Infrared DIY Tutorial Step 13

Canon Rebel 300D Infrared DIY Tutorial Step 13

Remove marked screws and I/O mount (blue arrow).

Canon Rebel 300D Infrared DIY Tutorial Step 14

Canon Rebel 300D Infrared DIY Tutorial Step 14

Flip over the PCB and disconnect marked cables.

Canon Rebel 300D Infrared DIY Tutorial Step 15

Canon Rebel 300D Infrared DIY Tutorial Step 15

Remove marked screws and lift out the sensor assembly.

Canon Rebel 300D Infrared DIY Tutorial Step 16

Canon Rebel 300D Infrared DIY Tutorial Step 16

Peel off the black plastic mask.

Canon Rebel 300D Infrared DIY Tutorial Step 17

Canon Rebel 300D Infrared DIY Tutorial Step 17

Remove marked screws.

Canon Rebel 300D Infrared DIY Tutorial Step 18

Canon Rebel 300D Infrared DIY Tutorial Step 18

Pry up the hot mirror assembly which is affixed with double stick black tape.

Canon Rebel 300D Infrared DIY Tutorial Step 19

Canon Rebel 300D Infrared DIY Tutorial Step 19

Remove the black double stick tape.

Canon Rebel 300D Infrared DIY Tutorial Step 20

Canon Rebel 300D Infrared DIY Tutorial Step 20

Cut the adhesive around the hot mirror filter.

Canon Rebel 300D Infrared DIY Tutorial Step 21

Canon Rebel 300D Infrared DIY Tutorial Step 21

Replace with the infrared filter and seal with black silicone.

Canon Rebel 300D Infrared DIY Tutorial Step 22

Canon Rebel 300D Infrared DIY Tutorial Step 22

Remove the marked focus spacers.

Canon Rebel 300D Infrared DIY Tutorial Step 23

Canon Rebel 300D Infrared DIY Tutorial Step 23

After adhesive is fully cured clean the ir filter with lens cleaner and tissue, blow off with canned air and reassemble everything by following the instructions backwards. Set a custom white balance per our instructions page and take some test shots to make sure there is no dust trapped between the sensor and infrared filter. If you find dust and find it objectionable disassemble the camera again, blow off the sensor with canned air (make sure only air and no liquid is coming out by purging and holding it upright) and re cleaning the infrared filter.

If you prefer not to risk damage to your camera, have us convert it for you here.