You will need these tools & supplies to follow the Canon 7D infrared conversion tutorial:

- Infrared filter to replace the hot mirror
- Small philips type screwdriver
- Tweezers
- Canned air
- Lens cleaning solution & tissue
- Grounding strap /w current limit resistor

If you prefer not to risk damage to your camera, have us convert it to infrared for you here. It would be best to perform the conversion in a well lit area that is as clean and dust free as possible. Wearing a grounding strap will minimize the chance of zapping your camera with static and most likely rendering it dead.

Remove rubber eye cup.

Remove the rubber grip material and all marked screws.

Peel back rubber grip material and remove all marked screws.

Remove marked screws.

Lift back the rear cover and disconnect marked cable.

Remove I/O cover.

Disconnect marked cables.

Disconnect marked cables and screws.

Lift out the PCB assembly.

Remove marked screws and lift out the sensor assembly.

Remove marked screws.

Remove filter retainer.

Remove dust reduction filter.

Cut all adhesive around the hot mirror filter.

Remove hot mirror filter.

Install our replacement infrared filter and follow the tutorial in reverse order starting with step 12 to reassemble your camera.